|
Page | 1 | 2
| 3
| 4
| 5
| 6
|
Line hose
|
Blankets and Accessories |
Switchboard Matting
Linemen's Gloves |
Leather Glove Protectors |
Glove Kits, Accessories, and Storage
Linemen's Gloves
Linemen's
Gloves
Low Voltage - ASTM Class 00, 0
|
|
|
|
Selecting the right size,
length and style:
Salisbury linemen’s gloves are available in a
full range of
sizes, from 7,8 through 12, including half
sizes. Proper fit is
important. To determine glove size, measure
the circumference
around the palm. Allow for additional room if
fabric
glove liners are to be worn, especially with
thermal liners.
SALISBURY ADVANTAGE
Type I and Type II gloves are extremely
flexible to make
working with small parts easy. The gloves meet
or exceed
ASTM D120 and IEC EN60903 Standards.
Class 00 and 0 gloves are available in 11 and
14 inch lengths.
Class 00 Electrical Insulating Rubber Gloves
are made
from red or black Type I natural rubber, blue
Type II SALCOR®, or in contrasting blue/orange Type II
SALCOR.
The contrast between the outer orange color
against the inner
blue color makes inspecting for cuts and tears
easier
when the glove is inflated or stretched.
Class 0 Electrical Insulating Rubber Gloves
are available
in red, black, yellow, and contrasting
black/yellow colors in
Type I Natural Rubber. The contrast between
the outer yellow
color against the inner black color makes
inspecting for
cuts and tears easier when the glove is
inflated or stretched.
These gloves are also available in blue or
contrasting blue/
orange colors Type II SALCOR rubber.
|
Click for ASTM Labeling Chart |
| |
|
|
Cat. No. Breakdown for Class 00 Gloves |
|
Class |
Length |
Color |
Size |
| |
|
|
|
|
E |
00 |
11 |
R, B,
BL or BLO |
7, 8, 8H, 9
9H, 10, 10H
11, 11H, 12 |
| |
|
|
|
E |
00 |
14 |
R, B, BL or BLO |
|
|
R=red
B=black - Type 1 Natural Rubber
BL=blue
BLO=blue in, orange out - Type II
SALCOR
Example: E0011BL/8 |
|
| |
|
|
Cat. No. Breakdown for Class 0 Gloves |
|
Class |
Length |
Color |
Size |
| |
|
|
|
|
E |
0 |
11 |
Y, B, R, BL, BLO, or BY |
7, 8, 8H, 9
9H, 10, 10H
11, 11H, 12 |
| |
|
|
|
E |
0 |
14 |
Y, B, R, BL, BLO, or BY |
|
|
R=red
B=black Y=yellow BY=black in,
yellow out - Type 1 Natural Rubber
BL=blue
BLO=blue in, orange out - Type II
SALCOR
Example: E014R/9 |
|
| |
|
Linemen's
Gloves
High Voltage - ASTM Class 1, 2, 3, 4 |
| |
|
| Class
1 through 4 gloves are available in
the industry standard color black, or in
contrasting two-color combinations. The
contrast between the thin outer color
against the inner color makes inspecting
for cuts and tears easier when the glove
is inflated or stretched.
Class 1 through 4 gloves are available in
14, 16 and 18 inch lengths. A straight
cuff is standard on 14” (356 mm), 16”
(406 mm) & 18” (457 mm) gloves. The
straight cuff is the default style.
A contour cuff is angled to prevent
bunching or binding at the elbow when
the arm is bent. Available on all 18"
(457mm) gloves only.
The bell cuff and flare cuff, accommodate
heavier winter clothing and allow for
greater air flow in warmer weather.
These are available for Class 1 through 4
gloves. Bell and flare cuff gloves are not
available in sizes 7, 8 or 8H. |
Click for ASTM Labeling Chart |
|
| |
|
|
Cat. No. Breakdown for Class 1, 2, 3, 4 Gloves |
|
Class |
Length |
Cuff Style |
Color |
Size |
| |
|
|
|
|
|
E |
1 |
14, 16, or 18 |
FC, BC, C |
B, YB, or RB |
7, 8, 8H, 9
9H, 10, 10H
11, 11H, 12 |
|
E |
2 |
14, 16, or 18 |
FC, BC, C |
B, YB, or RB |
|
E |
3 |
14, 16, or 18 |
FC, BC, C |
B, YB, or RB |
|
E |
4 |
14, 16, or 18 |
FC, BC, C |
B, YB, or RB |
|
|
FC=Flare Cuff BC=Bell
Cuff C=Contour Cuff
B = black YB = yellow inside, black out RB = red inside,
black out
All HV gloves are Type I natural rubber
Example: E116FCYB/10 |
|
| |
|
Linemen's
Mittens
High Voltage - ASTM Class 1, 2, 3, 4 |
| |
|
|
Salisbury
Lineman’s Mittens are made from the same
durable, lightweight rubber as the five finger
gloves yet
keep the user warmer during harsh
temperatures. The three
finger mitten allows for precise hand movement
as well.
Class 1 through 4 mittens are available in the
industry
standard black or in contrasting two-color
combinations.
The contrast between the thin outer color
against the inner
color makes inspecting for cuts and tears
easier when the
glove is inflated or stretched.
Class 1 through Class 4 mittens are available
in 14, 16 and
18 inch lengths. A bell cuff design is
standard on all
mittens. BC=Bell Cuff.
Mittens are available in sizes 9, through 11
full sizes only. |
Click for ASTM Labeling Chart |
| |
|
|
Cat. No. Breakdown for Class 1, 2, 3, 4 Gloves |
|
Class |
Length |
Cuff Style |
Color |
Size |
| |
|
|
|
|
|
EM |
1 |
14, 16, or 18 |
BC |
B, YB, or RB |
9
10
11 |
|
EM |
2 |
14, 16, or 18 |
BC |
B, YB, or RB |
|
EM |
3 |
14, 16, or 18 |
BC |
B, YB, or RB |
|
EM |
4 |
14, 16, or 18 |
BC |
B, YB, or RB |
|
|
BC=Bell Cuff
B = black YB = yellow inside, black out RB = red inside,
black out
All HV gloves are Type I natural rubber
Example: EM318BCYB/10 |
|
| |
|
|
Page | 1 | 2
| 3
| 4
| 5
| 6
|
|
|
