|
Page | 1 | 2
| 3
| 4
| 5
| 6
|
Line hose
|
Blankets and Accessories |
Switchboard Matting
Linemen's Gloves |
Leather Glove Protectors |
Glove Kits, Accessories, and Storage
Leather Glove Protectors
Leather
Protectors
Information
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Leather Protector Gloves should always be worn
over Rubber Insulating Gloves to provide the
needed mechanical protection against cuts,
abrasions
and punctures. All Salisbury protectors are
steamed pressed on curved hand forms to insure
proper fit over Rubber Gloves. Manufactured from
top grade leather, all are sewn with heavy duty
nylon
thread in the “gunn cut” inseam construction
pattern.
Each protector for Class 1-4 gloves are
equipped with a nonmetallic buckle on the pull
strap
and an extra wide leather reinforcement over the
thumb seam. Protectors for Class 00 and 0 gloves
are available with non-metallic buckle and pull
strap
or elastic wrist.
All Salisbury Leather Protectors meet ASTM
F696 standards.
It is the responsibility of the purchaser to
specify
the overall length of the protector gloves. The
Clearance
Table shows the minimum distance which
shall be allowed between the protector glove cuff
and the bead of the rubber glove per ASTM F496
Specifications.
WARNING: Do not use leather protectors alone
for protection against electric shock. Serious
injury or death will result. Always use proper
rubber insulating gloves.
Proper care of leather protectors is essential to
user
safety. Inspect the leather protectors when
inspecting
rubber gloves. Metal particles, imbedded wire,
abrasive materials or any substance that could
physically damage the rubber gloves must be
removed
from the protector before use. |
 |
|
|
|
|
|
|
|
|
|
Leather
Protectors
Premium
|
|
|
|
|
THE SALISBURY ADVANTAGE
156
Premium Series
Salisbury’s SALCOR® cuff provides maximum
protection.
These protectors are made from specially tanned
Grade A
Red Boulevard buffed leather and an orange colored
SALCOR “Super Cuff” in the 4” (102 mm) and 6” (152
mm) cuff lengths. The “Super Cuff” has better
characteristics
than leather or vinyl cuffs; it does not absorb
water, has
greater track resistance, and creepage.
|
Cat. No. |
Cuff Length
in. (mm) |
OAL Length
in. (mm) |
Weight Ea.
lbs. (kgs) |
| |
|
|
|
|
156-4 |
4 (102) Straight Cuff |
12 (305) |
1 (.5) |
| |
|
|
|
|
156-6 |
6 (152) Straight Cuff |
14 (356) |
1.2 (.5) |
103 Mitten Protector
Three finger mitten protectors provide mechanical
protection
for lineman’s rubber insulating mittens. They are
constructed
of the same high quality Grade A Red Boulevard
buffed
leather as the 156 series protectors. The SALCOR®
“Super
Cuff” is standard for 4” (102 mm) or 6” (152 mm)
cuffs.
With a non-metallic nylon pull strap fastened at
the wrist,
these protectors are designed for comfort and long
wear.
|
Cat. No. |
Cuff Length
in. (mm) |
OAL Length
in. (mm) |
Weight Ea.
lbs. (kgs) |
| |
|
|
|
|
103-4 |
4 (102) Cuff |
12 (305) |
1.2 (.5) |
| |
|
|
|
|
103-6 |
6 (152) Cuff |
14 (356) |
1.3 (.6) |
|
 |
| |
|
Leather
Protectors
Working Grade |
| |
|
ILP Series
Manufactured from top grain cowhide, or
goatskin, these protectors
provide excellent protection for rubber
insulating gloves at a
very economical price. Cowhide cuffs are
tough leather on palm
side and orange vinyl on the back, while
the goatskin cuffs are
green leather on palm side and orange
vinyl on back. Full complement
of styles from low-volt through 16”
contour cuff. Comes in
size 7, dual sizes 8/8.5 through 11/11.5
and size 12.
ILPM Series Mitten Protector
Manufactured from top grain cowhide, these
protectors offer excellent
comfort and protection. The ILPM Series
mitten protectors
feature adjustable straps with
non-metallic buckles and are stitched
with polyester thread for strong seams.
Cuffs are tough leather on
palm side and orange vinyl on the back of
the hand. Comes in sizes
9, 10 and 11.
LP Series
Manufactured from top grain cowhide or
goatskin, these protectors
offer excellent comfort and protection.
The LP Series protectors
feature adjustable straps with
non-metallic buckles and are
stitched with polyester thread for strong
seams. Cuffs are tough
leather on palm side and orange vinyl on
the back of the hand.
Comes in sizes 7 to 12, including half
sizes 8 1/2 to 11 1/2.
|
Cat No. |
Oal Length
in. (mm) |
Weight ea.
lbs. (kgs) |
|
ILP Series - Cowhide |
|
ILP3S |
12 (405) |
1 (.5) |
|
ILP4S |
13 (330) |
1 (.5) |
|
ILP5S |
14 (356) |
1.2 (.5) |
|
ILP6S |
15 (381) |
1.2 (.5) |
|
ILP7C |
16 (406) |
1.5 (.7) |
|
ILP10 |
10 (254) |
.7 (.32) |
|
ILP10A |
10 (254) |
.7 (.32) |
|
To
specify goatskin, use ILPG. Goatskin
not available in size 7. Gloves are
available in dual sizes: 7, 8/8.5,
9/9.5, 10/10.5, 11/11.5, 12 |
|
ILPM Series - Cowhide |
|
ILPM3S |
12 (305) |
1 (.5) |
|
ILPM4S |
13 (330) |
1 (.5) |
|
ILPM5S |
14 (356) |
1.2 (.5) |
Available in sizes: 9, 10, 11
LP Series |
|
LP3S |
12 (305) |
1 (.5) |
|
LP4S |
13 (330) |
1 (.5) |
|
LP5S |
14 (356) |
1.2 (.5) |
|
LP6S |
15 (381) |
1.2 (.5) |
|
LP7C |
16 (406) |
1.5 (.7) |
|
LP10 |
10 (254) |
.7 (.32) |
|
LP10A |
10 (254) |
.7 (.32) |
|
To specify goatskin,
use LPG. Available in single sizes: 8,
8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12 |
|
 |
| |
|
|
|
|
|
|
|
Page | 1 | 2
| 3
| 4
| 5
| 6
|
|
